Push button box

Push button box in AISI 304 (Wnr 1.4301) stainless steel. Ideal for use in the most demanding industrial sectors thanks to the positioning of the gasket inside the lid that allows it to be exposed to even the most aggressive and burdensome environments. Fitted as standard with o-ring kit that exceed the compliance requirements of regulatory standards of the food industry. Supplied with a o-ring kit for use on applications in an environment resistant to hydrocarbons. Pre-drilled lid. Internal plate not included. Degree of protection IP66, IP67 and IP69K, UL certified. On request also Atex

  • Technical information
    Technical description
    Type of steel AISI 304 Scotch-brite
    Thicknesses cover 1 mm
    Door thicknesses The door has a thickness of 10/10 when W and H are ≤ 350 mm, and 15/10 when at least one of the two between W and H is > 350 mm
    Door fastening screwed on
    Door opening detachable
    Cover thickness 1 mm
    Seal silicone
    Type of steel AISI 304 Scotch-brite
    Internal plate on request: 25/10 FeZn plate, if necessary also for models with 90 mm short side
    Cover drilled for buttons
    Closing system screwed-on M5
    Technical data
    Door drilling reference W-60 mm H-60 mm
    Internal plate W-40 mm H-15 mm for enclosures with sides < 100 mm W-30 mm H-30 mm for enclosures with sides >100 mm (4 bushes)
    Useful depth D-20 mm
    Lower door opening
    Enclosure fastening H-30 mm for enclosures with sides ≤ 100 mm H-50 mm for enclosures with sides >100 (4 M5 bushes)
    Minimum dimensions W=90 mm H=90 mm D=90 mm W=100 mm H=100 mm D=80 mm
    Maximum dimensions W=500 mm H=500 mm D=200 mm
    Dimensional pitch 10 mm
  • Customisation
    Customisation options
    Dimensions up to W=600 mm H=600 mm D=200 mm with 15/10 thickness
    Thicknesses possibility of having the cover and door with 2 mm or 3 mm thickness
    Material AISI 316L
    Finishes SN Coarse satin, BA Polished, 2B Matt, coating, micro shot-peening, passivation
    Rear fastenings stud bolts, on request without fastenings
    Seal polyurethane
    Door no. of button holes on request with limitations, drilling W-60 mm H-60 mm
    Sides application of the flange on sides, top and bottom, drilling, H-20 mm W-20 mm D-33 mm (10 mm+23 mm)
    Internal plate assembly on stud bolts, blind back
    Handles from H/L >180 mm
    Minimum depth of assembled joint 110mm
    Manoeuvre arm si
    Components on request internal plate, if required made of stainless steel

    *da verificare in fase d’ordine

  • Product accessories
    • Model PD3210 pedestal
    • DIN rail support
    • Hygienic wall-mounted support spacers
    • Wall-mounted raised brackets
    • Wall-mounted flat brackets
  • Technical drawings
    Download the DWG files: Download the PDF files:
  • Certifications on request

    IP67 - Atex 3GD - Atex 2GD

  • Standard certifications
    Download the documentation relative to the standard certifications:
  • Download area
    Download the technical documentation:

Request information

Contact us to receive information on APN

Privacy information
Having read the above disclosure,

It is necessary to either give or deny your consent to marketing activities.

Irinox S.p.A. to use the contact information of the interested person to conduct opinion and satisfaction surveys, and transmit commercial communications containing information on its products or services, as well as promotions or invitations to events in which the Owner will be participating.