Push button box
APH

Push button box in AISI 304 (Wnr 1.4301) stainless steel. The special profile designed to facilitate cleaning makes it ideal for use where high standards of hygiene are required. Screwed cover with “clip-in” silicone gasket, UL certified and in compliance with FDA, pre-drilled with Ø 22,5 mm holes (0.89’’). Without internal mounting plate. Protection rating IP 66. On request IP 69K.

305
APH
  • Technical information
    Technical description
    Type of steel AISI 304 Scotch-brite
    Thicknesses cover 1 mm
    Door thicknesses The door has a thickness of 10/10 when WxH is below 80,000 mm2; beyond this size the thickness is 12/10
    Door fastening screwed on
    Door opening detachable
    Cover thickness 1 mm
    Dimensions silicone
    Seal AISI 304 Scotch-brite
    Cover fastening total of 4 screws (standard set of screws supplied dismantled: 4 hex-head screws + 4 slot-head screws)
    Internal plate on request: 25/10 FeZn plate, if necessary also for models with 90 mm short side
    Cover drilled for buttons
    Closing system screwed-on M5
    Technical data
    Door drilling reference W-40 mm H-40 mm
    Internal plate absent
    Useful depth D-15 mm
    Enclosure fastening H-30 mm up to short side 100 mm H-50 mm for enclosures with sides >100 (4 M5 bushes)
    Minimum dimensions W=80 mm H=80 mm D=60 mm
    Maximum dimensions W=400 mm H=400 mm D=200 mm
    Dimensional pitch 10 mm
  • Customisation
    Customisation options
    Dimensions pitch 10 mm
    Thicknesses 1.2 mm to be verified during the order phase
    Material AISI 316L
    Finishes SN Coarse satin, BA Polished, 2B Matt, coating, micro shot-peening, passivation
    Rear fastenings stud bolts, on request without fastenings
    Door no. of button holes on request with limitations, drilling W-40 mm H-40 mm
    Sides possibility of inclining the 4 sides to 7°, drilling H-20 mm, W-20 mm, D-33 mm (10 mm+23 mm)
    Internal plate assembly on stud bolts, blind back
    Handles from H/L >180 mm
    Minimum depth of assembled joint 110mm
    Manoeuvre arm si
    Components on request internal plate, if required made of stainless steel

    *da verificare in fase d’ordine

  • Product accessories
    • Flangia ingresso cavi
    • Model PD3210 pedestal
    • DIN rail support
    • Hygienic wall-mounted support spacers
    • Wall-mounted raised brackets
    • Wall-mounted flat brackets
  • Technical drawings
    Download the DWG files: Download the PDF files:
  • Certifications on request

    IP67 - IP69K - Atex 3GD - Atex 2GD - UL/CSA

  • Standard certifications
    Download the documentation relative to the standard certifications:
  • Download area
    Download the technical documentation:

Request information

Contact us to receive information on APH

Privacy information
Having read the above disclosure,

It is necessary to either give or deny your consent to marketing activities.

Irinox S.p.A. to use the contact information of the interested person to conduct opinion and satisfaction surveys, and transmit commercial communications containing information on its products or services, as well as promotions or invitations to events in which the Owner will be participating.