Terminal box in AISI 304 (Wnr 1.4301) stainless steel. The special profile designed to facilitate cleaning makes it ideal for use where high standards of hygiene are required. Solid screwed cover complete with “clip-in” silicone gasket, UL certified and in compliance with FDA. FeZn 25/10 internal mounting plate. Protection rating IP 66. On request IP 69K.
Terminal box in stainless steel
ADH

Terminal box in stainless steel
ADH
-
Technical information
Technical description Type of steel AISI 304 Scotch-brite Thicknesses cover 1 mm Door thicknesses The door has a thickness of 10/10 when WxH is below 80,000 mm2; beyond this size the thickness is 12/10 Door fastening screwed on Door opening detachable Cover thickness 1 mm Seal silicone Type of steel AISI 304 Scotch-brite Cover fastening total of 4 screws (standard set of screws supplied dismantled: 4 hex-head screws + 4 slot-head screws) Internal plate 25/10 FeZn plate included, on request also for models with 90 mm short side Cover blind Closing system screwed-on M5 Technical data Door drilling reference W-40 mm H-40 mm Internal plate W-20 mm H-15 mm up to short side 100 mm W-20 mm H-20 mm for enclosures with sides >100 (4 bushes) Useful depth D-15 mm Enclosure fastening H-30 mm up to short side 100 mm H-50 mm for enclosures with sides >100 (4 M5 bushes) Minimum dimensions W=80 mm H=80 mm D=60 mm Maximum dimensions W=400 mm H=400 mm D=200 mm Dimensional pitch 10 mm -
Customisation
Customisation options Dimensions pitch 10 mm Thicknesses 1.2 mm to be verified during the order phase Material AISI 316L Finishes SN Coarse satin, BA Polished, 2B Matt, coating, micro shot-peening, passivation Rear fastenings stud bolts, on request without fastenings Door drilling W-40 mm H-40 mm, LEXAN STD min. 130 mmX130 mm, LEXAN UL min. 150 mmX150 mm, glass 3+3 min. 250 mmX250 mm Sides possibility of inclining the 4 sides to 7°, drilling H-20 mm, W-20 mm, D-33 mm (10 mm+23 mm) Internal plate assembly on stud bolts, blind back Handles from H/L >180 mm Minimum depth of assembled joint 110mm Manoeuvre arm si Components on request stainless steel internal plate *da verificare in fase d’ordine
-
Product accessories
- Flangia ingresso cavi
- Model PD3210 pedestal
- DIN rail support
- Hygienic wall-mounted support spacers
- Wall-mounted raised brackets
- Wall-mounted flat brackets
-
Technical drawings
Download the DWG files: Download the PDF files:
-
Certifications on request
-
Standard certifications
Download the documentation relative to the standard certifications:
-
Download area
Download the technical documentation:
Request information
Contact us to receive information on ADH