Push button box in AISI 304 (Wnr 1.4301) stainless steel. The special profile designed to facilitate cleaning makes it ideal for use where high standards of hygiene are required. Screwed cover with “clip-in” silicone gasket, UL certified and in compliance with FDA, pre-drilled with Ø 22,5 mm holes (0.89’’). Without internal mounting plate. Protection rating IP 66. On request IP 69K.
-
Technical information
Technical description Type of steel AISI 304 Scotch-brite Thicknesses cover 1 mm Door thicknesses The door has a thickness of 10/10 when WxH is below 80,000 mm2; beyond this size the thickness is 12/10 Door fastening screwed on Door opening detachable Cover thickness 1 mm Seal silicone Type of steel AISI 304 Scotch-brite Cover fastening total of 4 screws (standard set of screws supplied dismantled: 4 hex-head screws + 4 slot-head screws) Internal plate on request: 25/10 FeZn plate, if necessary also for models with 90 mm short side Cover drilled for buttons Closing system screwed-on M5 Technical data Door drilling reference W-40 mm H-40 mm Internal plate absent Useful depth D-15 mm Enclosure fastening H-30 mm up to short side 100 mm H-50 mm for enclosures with sides >100 (4 M5 bushes) Minimum dimensions W=80 mm H=80 mm D=60 mm Maximum dimensions W=400 mm H=400 mm D=200 mm Dimensional pitch 10 mm -
Customisation
Customisation options Dimensions pitch 10 mm Thicknesses 1.2 mm to be verified during the order phase Material AISI 316L Finishes SN Coarse satin, BA Polished, 2B Matt, coating, micro shot-peening, passivation Rear fastenings stud bolts, on request without fastenings Door no. of button holes on request with limitations, drilling W-40 mm H-40 mm Sides possibility of inclining the 4 sides to 7°, drilling H-20 mm, W-20 mm, D-33 mm (10 mm+23 mm) Internal plate assembly on stud bolts, blind back Handles from H/L >180 mm Minimum depth of assembled joint 110mm Manoeuvre arm si Components on request internal plate, if required made of stainless steel *da verificare in fase d’ordine
-
Product accessories
- Flangia ingresso cavi
- Model PD3210 pedestal
- DIN rail support
- Hygienic wall-mounted support spacers
- Wall-mounted raised brackets
- Wall-mounted flat brackets
-
Technical drawings
Download the DWG files:
-
Certifications on request
-
Download area
Download the technical documentation:
Request information
Contact us to receive information on APH