Control consoles in AISI 304 stainless steel with 10° sloping lower panel and 78° sloping upper panel with gas struts. Lower section with removable door. Screwed rear door. Complete with lifting eyebolts and two adjustable internal mounting plates in 25/10 FeZn. Standard cable entry plinth H=100 mm (3.94”) with open bottom. IP 65 / IP 55 protection rating (according to dimensions).
-
Technical information
Technical description Type of steel AISI 304 Scotch-brite Thicknesses 1.5 mm Door thicknesses 1.5 mm Door detachable Sloping unit door blind Sloping unit panel fastening hinges Door fastening rear with hinges Lower door fastening detachable Lower door opening detachable Sloping unit door opening 90° Cabinet back hinged Frame pre-drilled 20 mmX20 mm pipe mounted with stud bolts and joining corner element for earthing Top application of standard eye bolts Cabinet bottom standard cable pass-through plinth H=100 mm open on bottom Cover thickness 1.5 mm Seal polyurethane Type of steel AISI 304 Scotch-brite Internal plate FeZn 2.5 mm Closing system stainless steel box 1/4 turn with a double open-end spanner Technical data Internal plate W-100 mm H=690 mm adjustable depth-wise Lower door opening detachable Sloping unit door opening 90° with pistons Sloping unit drilling reference W-90 mm H=240/460 mm Synoptic panel drilling reference W-90 mm H=400/430 mm Minimum dimensions W=800 mm H=1220 mm D=820 mm Maximum dimensions W=2000 mm H=1500 mm D=950 mm Dimensional pitch W pitch 200 mm -
Customisation
Customisation options Dimensions adaptable on request Thicknesses adaptable on request Material AISI 316L Finishes SN Coarse satin Seal silicone Internal plate A304 / A316 *da verificare in fase d’ordine
![Lorem ipsum]( "Lorem ipsum")
-
Download area
Download the technical documentation:
Request information
Contact us to receive information on DPEW