Enclosure in AISI 304L stainless steel with hinged blind door. Door opening angle up to 130° with left hinges. 25/10 FeZn internal plate. IP66 protection rating. Models with a width greater than 1000 mm are created with 2 blind doors that close onto each other without a central support, IP66 protection rating.
-
Technical information
Technical description Type of steel AISI 304L Scotch-brite Door thicknesses 1.2 mm and 1.5 mm depending on the size Door Hinged Door opening 130° Closing system Stainless-steel lock, 1/4 turn with a double-bit key Cover thickness 1.2 mm and 1.5 mm depending on the size Rear fastenings Bushes M6 Internal plate FeZn 2.5 mm Seal Silicone Technical data Minimum dimensions W= 200mm H= 200mm D=1 20mm Maximum dimensions Single door: W= 800mm H= 1600mm D= 400mm Double door: W= 1400mm H= 800mm D= 400mm Dimensional pitch 10 mm Door drilling reference W- 70 mm H- 70 mm Internal plate W- 55 mm H- 55 mm for enclosures with at least one side ≤ 1000 mm, W- 45 mm for enclosures with at least one side > 1000 mm (> 4 bushes) Useful depth D- 20 mm Interasse fissaggio cassa H- 70 mm W- 70 mm, M6 bushes, the fastenings vary based on combinations of dimensions -
Customisation
Customisation options Dimensions Single door: W= 1000 mm H= 1600 mm D= 600 mm Double door: W= 1600 mm H= 1450 mm D= 600 mm or W= 1450 mm H= 1600 mm D= 600 mm Thicknesses 2 mm or 3 mm Material AISI 316L, A316 titanium Finishes SN Coarse satin, BA Polished, 2B Matt, coating, micro shot-peening, passivation Rear fastenings Stud bolts, M8 or M10 bushes, without fixings on request Seal Polyurethane Door Front/back, removable on lock, screwed-on, with handle, with trim, hinges with screws, hinges on right, mechanical door stop, piston door stop, opening towards the top with gas piston Sides Application of cable gland plate on sides, top and bottom, dimensions H- 20 W- 20 D- 40 mm (10+30 mm) Different roof inclination -10° / 10° / 20° / 30° Internal plate Mounting on stud bolts (blind back) A304L or A316L, thickness 1.5 mm Handles Sides and bottom Manoeuvre arm Si, con profondità minima 130 mm Components on request Inner door in AISI 304L/AISI 316L, FeZn or A316 eye bolts, A316 hardware *da verificare in fase d’ordine
![Lorem ipsum]( "Lorem ipsum")
-
Product accessories
- DIN rail support
- Plinth
- Model PD3510 pedestal
- Model PD PD6411 pedestals
- Model PD 649 pedestal
- Rain canopy
- Wheels
- Feet
- Protective windows
- Wall mounting brackets
-
Technical drawings
Download the DWG files: Download the PDF files:
-
Certifications on request
-
Standard certifications
Download the documentation relative to the standard certifications:
-
Download area
Download the technical documentation:
Request information
Contact us to receive information on EKO